Hi Everyone, Now I gonna show you, How to Change DNS of your PC to increase performance of internet and IP to speed up your broadband connection.
So follow my steps To increase your Internet speed and performance.
Step1 : As first click start, and Open your Control Panel.
Step2 : In control panel click “Network and Internet Connections” there, you have to click and open “Network Connections” as like in image below.
Step3 : After “Network Connections” got opened, there you Right click on “Local Area Connection” under “LAN or High-Speed Internet” and click “properties” like shown in picture below,
Step4 : Under “General” tab of Properties window of “LAN or High-Speed Internet”,
And also next to “This connection uses the following items:”Scroll down and select “Internet Protocol(TCP/IP)” and click properties below to that.
Step5 : In That Property window, Under “General” Select “Use the Following IP address:” and enter the information below as one by one.
Ip Address : 192.168.1.91
Subnet Mask : 255.255.255.0
Default gateway : 192.168.1.1
After filled all above, below to that
Also Select “Use the following DNS server addresses:” and enter the Information given below
Preferred DNS server : 98.137.54.238
Alternate DNS server : 98.139.54.60
Click ok to close property of (TCP/IP)
Again Click close Property of “Local Area Connection”
Now you have done successfully..
Just re plug your modem and check the different..
So follow my steps To increase your Internet speed and performance.
Step1 : As first click start, and Open your Control Panel.
Step2 : In control panel click “Network and Internet Connections” there, you have to click and open “Network Connections” as like in image below.
Step3 : After “Network Connections” got opened, there you Right click on “Local Area Connection” under “LAN or High-Speed Internet” and click “properties” like shown in picture below,
Step4 : Under “General” tab of Properties window of “LAN or High-Speed Internet”,
And also next to “This connection uses the following items:”Scroll down and select “Internet Protocol(TCP/IP)” and click properties below to that.
Step5 : In That Property window, Under “General” Select “Use the Following IP address:” and enter the information below as one by one.
Ip Address : 192.168.1.91
Subnet Mask : 255.255.255.0
Default gateway : 192.168.1.1
After filled all above, below to that
Also Select “Use the following DNS server addresses:” and enter the Information given below
Preferred DNS server : 98.137.54.238
Alternate DNS server : 98.139.54.60
Click ok to close property of (TCP/IP)
Again Click close Property of “Local Area Connection”
Now you have done successfully..
Just re plug your modem and check the different..
Consider my video tutorial to this topic:












